substitutions:
  device_name: "nimble-shelly"
  entity_id: "nimble_shelly"
  room_name: "office"

mqtt:
  broker: !secret mqtt_broker
  username: esphome
  password: !secret mqtt_password
  discovery: false
  id: mqtt_client

external_components:
  - source:
      type: local
      path: ./components

nimble_tracker:
  scan_parameters:
    # window: 500ms
    # interval: 1.2s

    window: 100ms
    interval: 100ms
    active: false

globals:
  - id: room_topic
    type: std::string
    initial_value: '"room_presence/${room_name}"'

sensor:
  - platform: nimble_distance
    irk: !secret apple_watch_irk
    name: "Apple Watch Distance"
    id: apple_watch_distance
    internal: true
    # TODO: should we retain the mqtt message?
    on_value:
      then:
        - lambda: |-
            id(mqtt_client)->publish_json(id(room_topic), [=](ArduinoJson::JsonObject root) -> void {
              root["id"] = "apple_watch";
              root["name"] = "Apple Watch";
              root["distance"] = id(apple_watch_distance).state;
            });

esphome:
  name: ${device_name}
  platformio_options:
    board_build.f_cpu: 160000000L

esp32:
  board: esp32dev
  framework:
    type: esp-idf
    sdkconfig_options:
      CONFIG_FREERTOS_UNICORE: y
      CONFIG_ESP32_DEFAULT_CPU_FREQ_160: y
      CONFIG_ESP32_DEFAULT_CPU_FREQ_MHZ: "160"
      # From https://github.com/esphome/issues/issues/2941
      # Increase watchdog timeout to flash firmware with bluetooth enabled, fixes error:
      # ERROR Error receiving acknowledge binary size: timed out
      CONFIG_ESP_TASK_WDT_TIMEOUT_S: "20"
      CONFIG_BT_BLE_50_FEATURES_SUPPORTED: y
      CONFIG_BT_BLE_42_FEATURES_SUPPORTED: y

output:
  - platform: gpio
    id: "relay_output"
    pin: GPIO26

status_led:
  pin:
    number: GPIO0
    inverted: true

# Enable logging
logger:
  level: VERBOSE

# Enable Home Assistant API
api:
  encryption:
    key: !secret api_encryption_key

ota:
  password: !secret ota_password

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    password: !secret wifi_password

switch:
  - platform: output
    id: shelly_relay
    name: "${entity_id}"
    output: "relay_output"
    # after reboot, keep the relay off. this prevents light turning on after a power outage
    restore_mode: ALWAYS_OFF

# From https://community.home-assistant.io/t/shelly-plus-1-esphome-bletracker/363549/38
# Setup a button in home assistant to reboot the shelly into safe mode
button:
  - platform: safe_mode
    name: "${entity_id}_safe_mode_restart"